May 9, 2003
The kit will come with everything you need.
Lights, Switch, Relay, Harness, and some hardware.
You can save some time and money if you use the original deflector.
Just cut out the blanks where the lights go and your good.
A new deflector is exactly the same as your stock one with the holes pre-cut.
When you get your kit and you have any questions feel free to contact me.
The install is pretty straightforward.
My instructions had a misprint on the location of the fog light harness plug-in location.
The instructions stated the wire plugs into slot "A3" on the lighting control block in the main fuse panel. It should actually go into the "D6" slot. Also the relay location they state in the instructions isn't shown at the correct spot for an 03, although you can easily see where it should go because it is all ready marked on the fuse panel lid.
The instructions also stated that you need to have the dealer program the TBS computer for the lights to work....... for me this was not true.
Once I got the lights installed they worked, as they should. No dealer programming needed.
I hope this helps.