April 4, 2007I'm trying to wire up some aditional tail lights but cant get them to work right, I wired them up to the tail light wires and tested them they blink aposite time the stock does and turn off when brack is applyed. I got a wire harness for 1157 light witch I got and it has 3 wires yellow brown black. I got 2 wires going to the stock tail light and 1 to the reverse all in one bezel. I'm shure some one has tryed installing a second set of tailights, please help thank you.
Forums : Electrical : Tail lights/blinkers (130 Views)
Subscribers : low86chvy
April 5, 2007So you want to install another 1157 on each side?
Brown = Running lights
Yellow = Left turnsignal / Brake
( The right one is Green)
Black = ground
1995 Chevrolet K2500 5.7L V8 TBI 4L80E 4.10`s C6P SF rear axle 130,000 miles
April 5, 2007Thanks for the help man but I didnt have a problem matching up the wires I guess it was the bulb its self needed a jumper of some kind that I got and now its install time I'll post pics of the finished product it should be sweet. thanks again for the help.